How to Disassemble UPVC Doors & Windows

1. Removing Window Screens
If your home has window screens installed, you should first remove them. Generalmente, simply push the screen upwards to free it from the track, allowing it to be easily removed.
2. Removing the Locks and Draft Guards from the Sliding Sash
Use a screwdriver to first remove the door and window gutter locks. Then, carefully inspect the plastic-steel door and window frames to see if there are draft guards installed. If so, remove these as well.
3. Removing the Covers from the Sliding Sash
Próximo, use a screwdriver to pry open the covers attached to the vertical members of the sliding sash. Work from the bottom up, then remove the entire cover. 4. Removing Sliding Windows
Simply push the sliding window upwards firmly and remove it like a screen.
5. Removing Screws from the Window Frame
The window frame of a plastic-steel door or window is typically fixed to the window opening with screws on all four sides. You’ll need to use a screwdriver to remove these screws first.
6. Removing Glue Marks
When installing the window frame of a plastic-steel door or window, sealant or foam is usually applied to the four sides to secure it. Por lo tanto, you’ll need to use a knife to separate the frame from the glue before removing it.
7. Removing the Window Frame: Once the frame and glue are separated, it can be removed directly. Tip: If you intend to continue using the disassembled plastic-steel door or window, you should handle it with care and keep the installation accessories safe to avoid any problems.